Products

Easy disassembly
Easy disassembly and can be equipped with various motors

Energy-saving
Efficient and energy-saving motor+efficient hydraulic design

Anti-corrosion
All castings are treated by electrophoresis

Ultra-low mute
stable operation+Excellent fluid performance

Intelligence upgrading
AI Intelligent perception of private domain+Intelligent operation and maintenance

1.Strongly alloy steel cutting cutter combine with impeller

   It can quickly and effectively cut the debris and discharge the pump chamber.

2.Stainless steel coupled

   Improve anti-rust ability of shaft, extend the service life of pump.

3.Double-end mechanical seal + framework oil seal or double-end mechanical seal +double channel sealing structure of single-end mechanical seal

   It can more effectively ensure the sealing effect of the pump and improve the service life of the pump.

4.Structure compact,small footprint

   It can be installed in tank directly, no need to build special pump room to install the pump,can save a lot of land and infrastructure costs

5.Easy installation and maintenance. 

   Small size of pump can installed freely, large pump equipped with automatic coupling device then can be installed automatically, installation and maintenance is very convenient.

6.Intelligent sensing system can be installed  

   It can automatically alarm and stop faults such as leakage, overload and over temperature.

1,For the industry pain points, reduce common faults (for common faults, solve the industry pain points) which is more sales force?

  Ⅰ. Wear resistant seal

       The exclusive patented mechanical seal structure design, can not fail in the case of continuous no-load operation of the pump for 8 hours,greatly reduce the industry's

       number one sealing failure - leakage failure rate and frequency of replacement of wearing parts

  Ⅱ. High temperature lubricating grease: equipped with brand bearings, customized high temperature lubricating grease, reduce the industry failure rate ranked second

       bearing failure rate!

  Ⅲ. Class H insulation: Better high temperature resistance and insulation performance, reducing the failure rate of the industry ranking third, the biggest loss of the machine

       failure rate!

  Ⅳ. Double channel impeller

       High pass rate performance reduces blockage

2.Energy-efficient

  Ⅴ.Energy-efficient motors

      Save energy and reduce costs in long term

  Ⅵ.Professional hydraulic optimization

      Pump head and impeller use professional CFD hydraulic analysis, and scientific optimization treatment, greatly improving the compatibility and hydraulic performance

  Ⅶ.Reasonable structure: Professional mechanical structure design, high-precision processing guarantee, digital factory manufacturing, to ensure that the mechanical loss is minimized

3.Increase service life

   Ⅷ. Super protection design: the protection level far exceeds IP55, can adapt to a variety of harsh environments

   Ⅸ. Stainless steel coupled

         Improve anti-rust ability of shaft, extend the service life of pump

  Ⅹ. Bearing pressure plate design

       Prevent bearing movement, improve bearing life, ensure motor stable operation 

4.Environmental protection safety

   Ⅹ. Spray coating process below 7.5kw and including 7.5kw

        No pollution to the environment, no toxicity to the human body, coating appearance quality is excellent, strong adhesion

SC/SCM High efficiency single stage double suction split case centrifugal pump design.

Easily back pull-out from motor for coupling design.

Pump case with anti-corrosive coating.

Available complete with electric motor or diesel engine.

Easily back pull-out from driver.

Pump case with anti-corrosive coating HT250.

Impeller in stainless steel AISI 304 or HT250.

Shaft in stainless steel AISI 304 or galvanized iron.

Quality bearing,mechanical seal/gland packing.

The pump is divided into horizontal installation and vertical installation,the pump shell is horizontally separated from the axis,the upper part is the pump cover,the lower part is thepump body,the suction inlet and outlet are on the pump body below the pump axis,and the center line of the impeller is perpendicular to the axis.The seal of the pump can be sealedwith packing or mechanical seal.

The middle opening pump at high temperature adopts the center line support structure.

The seal forms of shaft seal are packing seal and mechanical seal.

Can adopt lubrication and shaft lubrication,the pump runs stably and the high efficiency area is wide.

YE2 Series high-efficiency three-phase asynchronous motor is based on the latest energy efficiency rating of IEC60034-30 standard and IEC60034-2 rotating electrical machines Part 2

"losses and efficiency of rotating electrical test measurement method".These motors are covering a wide power range from 0.12kw to 1000kw.

The advanced technologies, process control, and our many years' production experience which can ensure the efficiency of motor reaching into the target level of IE2 standard;

This series motor is noted for their novel design, high efficiency, energy-saving, beautiful modeling, low noise, high efficiency, compact structure, convenient maintenance and so on.

The motor with Class F insulation, temperature rise by the full range of F-class assessment are greatly enhance the safety and reliability.

Mounting dimensions comply with IEC standard, the protection degree is Ip55.

IE2 series motors can be widely used for driving equipment of various machineries,

such as: blowers, pumps, compressors, ventilators,machine tools,reducers,Packing machinery, mine machinery, construction machinery. 

1.For the industry pain points, reduce common faults (for common faults, solve the industry

   pain points) which is more sales force?

   Wear resistant seal

   The exclusive patented mechanical seal structure design. It can not fail in the case of continuous

   no-load operation of the pump for 8 hours，greatly reduce the industry's number one sealing

   failure - leakage failure rate and frequency of replacement of wearing parts

   High temperature lubricating grease: equipped with brand bearings, customized high

   temperature lubricating grease, 

   reduce the industry failure rate ranked second  bearing failure rate!

   Class H insulation: Better high temperature resistance and insulation performance, reducing

   the failure rate of the industry ranking third,the biggest loss of the machine failure  rate!

2.Energy-efficient

   Energy-efficient motors

   Save energy and reduce costs in long term

   Professional hydraulic optimization

   Pump head and impeller use professional CFD hydraulic analysis, and scientific optimization

   treatment, greatly improving the compatibility and hydraulic performance

   Reasonable structure: Professional mechanical structure design, high-precision processing

   guarantee, digital factory manufacturing,to ensure that the mechanical loss is minimized

3.Increase service life

   Super protection design: the protection level far exceeds IP55, can adapt to a variety

                                              of harsh environments

   Stainless steel coupled

   Improve anti-rust ability of shaft, extend the service life of pump

  Bearing pressure plate design

  Prevent bearing movement, improve bearing life, ensure motor stable operation

4.Environmental protection safety

   Spray coating process below 7.5kw and including 7.5kw

   No pollution to the environment, no toxicity to the human body, coating

   appearance quality is excellent, strong adhesion.

5.Ultra-low noise: excellent hydraulic structure and high-efficiency motors ensure

                               ultra-quiet working conditions, creating a quiet working and living

                               environment in the field of building operations.