Leave Your Message
SC/SCM Single-stage double suction centrifugal pump

Single-stage double suction centrifugal pump

SC/SCM Single-stage double suction centrifugal pump

SC/SCM High efficiency single stage double suction split case centrifugal pump design.

Easily back pull-out from motor for coupling design.

Pump case with anti-corrosive coating.

Available complete with electric motor or diesel engine.

Easily back pull-out from driver.

Pump case with anti-corrosive coating HT250.

Impeller in stainless steel AISI 304 or HT250.

Shaft in stainless steel AISI 304 or galvanized iron.

Quality bearing,mechanical seal/gland packing.

The pump is divided into horizontal installation and vertical installation,the pump shell is horizontally separated from the axis,the upper part is the pump cover,the lower part is thepump body,the suction inlet and outlet are on the pump body below the pump axis,and the center line of the impeller is perpendicular to the axis.The seal of the pump can be sealedwith packing or mechanical seal.

The middle opening pump at high temperature adopts the center line support structure.

The seal forms of shaft seal are packing seal and mechanical seal.

Can adopt lubrication and shaft lubrication,the pump runs stably and the high efficiency area is wide.

    Single-stage centrifugal pumps in inline design
    Easily back pull-out from motor for coupling design
    Pump case with anti-corrosive coating
    Available complete with electric motor or diesel engine
    Easily back pull-out from driver
    Pump case with anti-corrosive coating HT250
    Impeller in stainless steel AISI 304 or HT250
    Shaft in stainless steel AISI 304 or galvanized iron
    Quality bearing,mechanical seal/gland packing
    The pump is divided into horizontal installation and vertical installation,the pump shell is horizontally separated from the axis,the upper part is the pump cover,the lower part is the pump body,the suction inlet and outlet are on the pump body below the pump axis,and the center line of the impeller is perpendicular to the axis.The seal of the pump can be sealed with packing or mechanical seal.
    The middle opening pump at high temperature adopts the center line support structure.
    The seal forms of shaft seal are packing seal and mechanical seal.
    Can adopt lubrication and shaft lubrication,the pump runs stably and the high efficiency area is wide.

    Water supply, Drainage, Irrigation, Power station, Hydro power station, Fire-fighting,

    Air-conditioning, Building industry, Marine applications and all kinds of water for industrial process.

    Pump case with anti-corrosive coating HT250
     
    Impeller in stainless steel AISI 304 or HT250
     
    Shaft in stainless steel AISI 304 or galvanized iron
     
    Quality bearing,mechanical seal/gland packing
    The double suction pump enters water from both sides,has good anti-cavitation performance,high efficiency and energy saving
     
    The pump has the advantages of simple installation,convenient maintenance and compact structure.
     
    No need to disassemble the inlet and outlet pipes,just open the pump cover and the rotor can be taken out for maintenance.
    Clean, thin, and non-flammable & non-explosive liquid that does not contain solid particles and fibers
     
    Liquid temperature between -10℃ and +120℃
     
    Ambient temperature up to +50℃
     
    Max. working pressure 25 bar
     
    Continuous service: S1

    Workshop Display

    DSC05478q9fDSC0548967rDSC05492uihDSC05495okoDSC05497ahgDSC05507moiDSC0550985gDSC05512f6s