End suction centrifugal pump

Products Categories

TD Detachable inline pump

SDL/SDW Single stage single suction centri...

CDL Multistage centrifugal pump

WQ-QG Cutting submersible sewage pump

ZW Non-clogging self priming sewage pump

SC/SCM Double suction split case pump

0102030405

SN/SNM End suction centrifugal pump

Anti-dry wear sealing

The mechanical seal is no longer a“vulnerable part”

Class H insulation

Extend the service life of the motor

Lower noise

significant improvement cavitation

Easy installation

It has strong adaptability to pipelines

sale@seadpump.com Whatsapp

Product Detail

SNBSNSMM End suction centrifugal pump (1)

End Suction centrifugal pump

Anti-dry wear sealing

Customized high-temperature lubricating grease,bearings, H-class insulation, and corrosion-resistant flow passage components ensure a longer service life.

SNBSNSMM End suction centrifugal pump (6)

Very durable

Customized high-temperature lubricating grease and bearings, Class Hinsulation, and re-duction of the probability of burnout.

SNBSNSMM End suction centrifugal pump (8)

Lower noise

The structure with the inlet diameter larger than the outlet diameter can significantly reduce the noise caused by the cavitation phenomenon.

SNBSNSMM End suction centrifugal pump (10)

Wider selection

The structure with the inlet diameter larger than the outlet diameter enables better fluid performance, a wider perfor-mance range and lower operating costs

SNBSNSMM End suction centrifugal pump (12)

wider application

Split structures, long-coupling and short-coupling structures can widely meet various application scenarios.

SNBSNSMM End suction centrifugal pump (14)

Easy installation

The outlet is at the top center line. The pump casing is supported by a base plate and can resist the stress caused by mis-alignment and deformation due to pipeline loads.

SNBSNSMM End suction centrifugal pump (16)

Intelligent operation and maintenance

As the pioneer of the category of digital intelligent industrial pumps, there are cutting-edge digital intelligent upgrad-ed models available for selection.

SNBSNSMM End suction centrifugal pump (18)

Application scenarios

End-suction centrifugal pump is a common fluid transfer equipment, which is widely used in many fields such as industry, construction, agriculture and municipal, and the following are some specif-ic application scenarios:

SZSZM Stainless steel end suction pump (22)

SNBSNSMM End suction centrifugal pump (21)

SNBSNSMM End suction centrifugal pump (22)

End Suction centrifugal pump		Basic type	Wear-resistant type	Intelligent type
APPEARANCE	Product color	Dark black+Deep sea blue	Dark black+Deep sea blue	Dark black+Deep sea blue
	Installation dimension	See product description for details	See product description for details	See product description for details
	Product packaging	Plywood box(yellow)/Carton	Plywood box(white)	Plywood box(white)
CONFIGURATION	Electrical motor	GB standard	GB standard /Energy-saving	Variable frequency / Energy-saving
	Bearing	C&U	C&U/NSK/SKF	C&U/NSK/SKF
	Shaft	304 stainless steel	304 stainless steel	304 stainless steel
	Machine seal	Ordinary	Dry abrasion- resistant	Dry abrasion- resistant
	Materials	Cast iron	Cast iron	Cast iron
Parameter	Pump efficiency
	Energy efficiency	IE3	IE2	IE2
	Insulation	Class F	Class H	Class H
	Grease temperature	-20～+150℃	-20～+180℃	-20～+180℃
	Protection class	IP55	＞IP55	＞IP55
	Noise	＜	＜	＜
After-sales service		The main components come with a one-year warrant

SNBSNSMM End suction centrifugal pump (23)

SZSZM Stainless steel end suction pump (26)

Warning:Make sure the power is disconnected before remov-ing or adjusting the junction box and the pump.The external power switch connected to the pump motor has a minimum electrode gap of 3mm.

The voltage and frequency of the power supply should conform to the indicated value on the pump nameplate to ensure that the power supply meets the require- ments of use.Install and ground accurately according to the wiring method indicated on the junction box(shown on the right).

Note:Recommended 11kw and below starts directly,11-75kw starts with Star-Delta Starting mode.75-400kw starts with Soft Starting mode.In ad-dition,the 45-200kw can also start with Autotransformer Start mode.The starting method is not unique,please consult a professional.

(Two)Rotation direction check

Seen from the fan cover,the rotating arrow rotates clock-wise,As shown at right.

Caution!

Do not start the pump to check the direction of motor rotation until the pump boby is filled with liquid and removes air

Before connecting the pump to the pipe,the direction must first be determined by the flow

arrow on the pump head.To ensure the tightness of the pipeline connection,please install rubber washer or other Sealing material between flanges.As shown at right.

End suction centrifugal pump

TD Detachable inline pump